 |
 |
    |
|
   |
|
Park Tool Oversize Adjustable Saw Guide$42.99
Park's Oversize Adjustable Saw Guide guides a hacksaw so that you can accurately cut fork steerers, airfoil-shaped seatposts and more. The guide is made to be held in a vise and it has hardened-steel cutting slots and a secure clamp for the part you're cutting so that you make a perfect cut every… [more] |
Park Tool Truing Stand Upright Extension$42.99
Park's Truing Stand Upright Extension installs in seconds to your TS-2 Professional Truing Stand. It allows the stand to be used on wheels with hubs up to 160mm wide (tandems and downhill bikes), as well as 29-inch mountain bike wheels. Plus, specially sized bosses on the TS-2EXT serve as adaptors… [more] |
Park Tool Cable Stretcher$43.99
Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for… [more] |
Park Tool Threadless-Fork Saw Guide for Carbon Composite Forks$43.99
Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides… [more] |
Park Tool Press Fit Bottom Bracket Bearing Tool Set$44.99
Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the… [more] |
Park Tool Torque Wrench$44.99
Park's Torque Wrench is the best way to get every nut and bolt on your bike tight enough, yet not too tight. This precision tool measures up to 60 inch pounds (a metric scale is also included) and has a 1/4-inch drive with an adapter, which accepts 3/8-inch-drive sockets. [more] |
Park Tool Digital Caliper$49.99
What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal… [more] |
Park Tool Freewheel Remover Wrench$49.99
Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit. [more] |
Park Tool P-Handled Torx Wrench Set$49.99
Park's Torx Wrench Set includes T-handled T6, T8, T10, T15, T20, T25, T30 and T40 Torx wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for exceptional durability. Plus, this set of super tools comes with… [more] |
Park Tool Torque Wrench$52.99
Park's Torque Wrench is the best way to get every nut and bolt on your bike tight enough, yet not too tight. This heavy-duty wrench provides excellent leverage and features a 3/8-inch drive capable of accurately measuring up to 600 inch pounds (a metric scale is included, too). [more] |
Park Tool Wheel Alignment Gauge$54.99
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29… [more] |
Park Tool Frame Alignment Gauge$59.99
Improperly aligned frames can cause tracking and shifting problems. The Frame Alignment Gauge quickly determines whether the frame is properly aligned and parallel. The FAG-2 features a retractable pointer that fits all sizes and types of bicycles. [more] |
Park Tool Internal Seat Tube Clamp$59.99
Clamping directly to certain frames can cause inadvertent damage to the frame or paint finish. You need Park's Internal Seat Tube Clamp! It securely holds most bikes without clamping on any frame tube. The hex-shaped shaft resists twisting while clamped in the repair stand and it works with a huge… [more] |
Park Tool Through-Axle Adapter$59.99
Park's Through-Axle Adapter is for use with their truing stands and it securely holds wheels with 12mm, 15mm and 20mm through-axle hubs. It even works with Cannondale Lefty wheels. [more] |
Park Tool Tool Roll$59.99
With Park's Tool Roll you'll be able to easily fix minor mechanicals on the road and trail. It includes Park's I-Beam Mini-Tool with 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. You also get Park's Pocket Protector Micro Pump that fits all valves and sports a… [more] |
Park Tool Tire Seating Tool$61.99
Park's Tire Seating Tool is designed to quickly seat the bead on stubborn tires. During inflation some tire beads can slip below the rim edge and become difficult to pull out and align. The PTS-1 comes to the rescue with its non-slip jaws and vinyl-coated handles that provide plenty of leverage for… [more] |
Park Tool Sliding Through-Axle Adapter$62.99
Park's Sliding Through-Axle Adapter converts their PRS-20, PRS-21 and PRS-23 repair stand (sold separately) to accept 15mm and 20mm through-axle wheeled bikes. Use your axle to mount your bike. One side of the adapter is for 15mm axles, the other for 20mm. [more] |
Park Tool P-Handled Hex Wrench Set$64.99
Park's Hex Wrench Set includes P-handled 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing… [more] |
Park Tool Cast Aluminum Tool Tray$69.99
Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2,… [more] |
Park Tool Home Mechanic Bearing Cup Press$79.99
Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups. [more] |
